Precision Crimping. Reliable Connections.
CMP ZerOhm crimping dies are engineered to work with ZerOhm cable lugs and splices, providing controlled compression to optimise the electrical and mechanical properties of the finished connection.
Available across the ZerOhm conductor-size range, the dies form an integral part of the CMP cable termination system.
Find Your Crimping Die
Two Crimp Profiles
U Crimp
The rounded U-crimp profile is designed to provide the optimal compression ratio for CMP copper compression lugs and splices while reducing the risk of flash or sharp edges on the completed crimp.
Hexagonal Crimp
The hexagonal profile provides all-round compression of the installed lug to optimise its electrical and mechanical properties.
Crimping Dies for Different Installation Requirements
CMP ZerOhm dies are available across 6 ton, 12 ton and 25 ton tooling platforms, enabling installers to select the appropriate combination for the conductor size and installation.
SBU – 6 ton / 60 kN
U-crimp dies offering a lightweight and versatile solution, particularly beneficial where accessibility and ergonomics are important.
BU – 12 ton / 120 kN
U-crimp dies offering increased die width. For larger-volume installations, the additional force can reduce the number of crimps required compared with lower-force tooling.
250H – 25 ton / 250 kN
Hexagonal crimp dies designed for larger conductor sizes and high-force hydraulic tooling.
The catalogue identifies die coverage extending from 8 AWG through to 1,000 kcmil, depending on die and tooling selection.
Built for Durability and Traceability
CMP ZerOhm dies are manufactured from high-strength tool steel for wear resistance and long service life, with a black oxide coating providing a hard-wearing, corrosion-resistant finish.
Clear front-face markings make selection easier, while identification within the crimping aperture stamps the die index number onto the finished connection, supporting visual inspection and traceability.
Simple Die Selection
Match the conductor. Match the lug. Match the die.
CMP ZerOhm dies use index numbers corresponding to the relevant lug and conductor size, helping installers select the correct tooling combination. The die identification is then transferred onto the completed crimp, providing a simple visual check after installation.
View Tool & Die Compatibility Matrix
Complete the ZerOhm System
For consistent connection performance, combine the correct ZerOhm Cable Lug + ZerOhm Die + ZerOhm Crimping Tool.
Explore Cable Lugs | Explore Crimping Tools